Work Surface with Raised Parts

BS not only supplies the food industry with slicers and sandwich cutters, but also provides different sized conveyor belts or work surfaces.
The special feature of these belts is that the tubes at a 45° angle are welded, for easier cleaning.
The belt can be disassembled and re-assembled very quickly (around 1 minute) without having to use any tools, as no parts are cantilevered.
Another feature is that the surface of the belt has rods placed diagonally, while the two central rods, which act as guides, are placed lengthwise.
A K 10 belt is vulcanised on the surface for perfect belt centering, and the edges are also sealed upon request. Belt tension is regulated by a pneumatic cylinder.
An electric raceway can also be provided at a 45° angle, as well as sockets, depending on the power needs of other work stations.
The electric panel has a differential gear for each socket, an inverter to control the belt, a seven-speed selector (with speeds stored) and two centesimal timers to manage the pacer and rotation star.
A second belt can also be provided on request, to speed up production changes without downtimes, or equipment for automatic washing and sanitisation of the belt.
Other optionals available on request include: butter spreader and surfaces to hold containers with sandwich fillings.
Besides conventional belts, BS also manufactures a work surface with RAISED PARTS.
The special feature of these belts is that the tubes at a 45° angle are welded, for easier cleaning.
The belt can be disassembled and re-assembled very quickly (around 1 minute) without having to use any tools, as no parts are cantilevered.
Another feature is that the surface of the belt has rods placed diagonally, while the two central rods, which act as guides, are placed lengthwise.
A K 10 belt is vulcanised on the surface for perfect belt centering, and the edges are also sealed upon request. The work surface with RAISED PARTS has several benefits, including saving space in the production line area and adapting to any structural conditions with uneven surfaces where a MODULAR STRAIGHT work surface cannot be used.